Textile Wastewater Color Treatment Water Decoloring Agent
|Appearance||Colorless or light-color sticky liquid||Light yellow or yellow sticky liquid||Colorless or light-color sticky liquid|
|PH(30% water solution)||2.0-5.0|
|Appearance:||Translucid liquid, colorless|
|Specific Gravity at 20°C:||1.1-1.3|
|PH Value (30% Solution):||3-6|
|Solubility:||Soluble With Water at Any Rate|
|Package:||30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs
net IBC drum|
|Storage Temperature:||Room temperature(10-35℃)|
Features & Applications:
Our water decoloring agent polymer is a quaternary ammonium
cationic copolymer, it's dicyandiamide formaldehyde resin. it has
excellent efficiency in decoloring, flocculating and COD removal.
It is mainly used to decolor the effluent with high colority from
dyestuff plant. It is suitable to treat waste water with activated,
acidic and disperse dyestuffs.
The water decoloring agent can also be used to treat waste water
from textile industry and dye houses, pigment industry, printing
ink industry and paper industry.
Our Water decolorant agent also can be used in the production
process of paper& pulp as retention agent
Concentration and viscosity of solution can be customized according
to customers’ needs.
6, Application method and notes:
1 .The product shall be diluted with 10-40 times water, then added
to the wastewater directly. After stirring for several minutes, the
clear water will be got by precipitation or air-floatation.
2. The optimized pH of the wastewater accepted is 6-10.
3. It is recommended to use this product with the inorganic
flocculants to treat the effluent with high color and COD to reduce
the operation cost. The order and proportion of agent dosage depend
on the flocculation test and the effluent treatment process.
4. The product would show layer separation and become white at low
temperature. There is no negative impact on the usage after mixing
|1||Make solution of LSD-01, mix with 40 times water to have 2.5%
solution for use.|
|2||Make PAC solution, 2-5% Al2O3|
|3||Have solution of Anionic Polyelectrolyte, 0.1%.|
|4||Have effluent, test pH value, adjust pH value to 8-9.(It is very
important, higher or lower pH, LSD-01 works not well)|
|5||Add PAC solution, mix with effluent completely. about 1-3 minutes|
|6||Add LSD-01 solution, mix with effluent completely, about 5-10
|7||Add small content of anionic polyelectrolyte solution, mix slowly
to have big floc. (this step is suggestion)|
|9||Check color for treated effluent|
|10||Adjust dosage of LSD-01 and PAC to do more test to have better
Package and storage:
1, Store in dry and ventilated room, recommended temperature 5-30℃.
The product is packed in 250kg/drum, or 1250kg/IBC.
2, Shelf life: 12 months